1 / 8
Bosch PKS66 Circular Saw to FSN Guide Rail adapter — zdjęcie 1
1 / 8

Bosch PKS66 Circular Saw to FSN Guide Rail adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed this to fit my circular saw to the Bosch professional Guide Rail.

Ocena
0 / 5
Polubienia
25
Pobrania
175
Wydruki
0
Wyświetlenia
1969
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Designed this to fit my circular saw to the Bosch professional Guide Rail. I did want to use this nice rail, but did not want to pay for a lousy adapter from Bosch.

Tested, used and works like a charm.

The two parts are connected to each other with some Countersunk Torx bolts (M3x6) and some nuts. Adapter is mounted through the bottom side with an M6 countersunk bolt

additional adapter holes are included in the design which can be fitted with heat set inserts. This was optional for more clamping, but eventually was not needed; the adapter clamps itself on the saw.

STEP-file added; feel free to edit

Tagi