Dual Umbrella and Flash Holder (Cheap Softbox Kit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turns a pair of photography umbrellas into a quasi-softbox
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Holds a pair of umbrellas, one shoot through and one reflective, and a flash in the middle.
Needs 1 each of the printed parts. The housing, base, and knob can be printed in PLA or PETG and printed in a 0.2mm layer. The TPU insert can be printed in 85A or 95A TPU in a 0.2mm layer height.
The hardware is a 1/4-20 1in bolt and a nut with a external tooth 1/4 external tooth washer between them, and 4 x #4 1/2 inch wood screws to hold the plate to the housing.
The base has 2 holes for optional #8-32 or 4mm thumb screws to increase stability on a tripod.
The knob is also my design available here.