Dual Umbrella and Flash Holder (Cheap Softbox Kit)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turns a pair of photography umbrellas into a quasi-softbox
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 44
- Makes
- 0
- Views
- 471
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Holds a pair of umbrellas, one shoot through and one reflective, and a flash in the middle.
Needs 1 each of the printed parts. The housing, base, and knob can be printed in PLA or PETG and printed in a 0.2mm layer. The TPU insert can be printed in 85A or 95A TPU in a 0.2mm layer height.
The hardware is a 1/4-20 1in bolt and a nut with a external tooth 1/4 external tooth washer between them, and 4 x #4 1/2 inch wood screws to hold the plate to the housing.
The base has 2 holes for optional #8-32 or 4mm thumb screws to increase stability on a tripod.
The knob is also my design available here.