1 / 3
45x45 Aluminum T-Slot Caster Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a caster adapter for 45x45 aluminum t-slot extrusions. f3d file included.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 237
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (15)Powiązane
This is a caster adapter for 45x45 Bosch Rexroth aluminum t-slot extrusions. The fit is tight and I had to use a rubber mallet to hammer it on.
Caster attachment holes are 27.5 mm apart. To adjust them, adjust casterPlate_w to the width/length of your caster plate and set casterPlate_hole_offset to the distance from the hole to the plate's outside edge.
f3d file included.