Enhanced First Layer Calibration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows 5 (five) adjustments during one short (12 minute max) print
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 201
- Wydruki
- 0
- Wyświetlenia
- 846
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
Allows 5 (five) adjustments during one short (12 minute max) print
Print instructions
Recommend using 0.2 layer height (all layers).
Start print at recommended first layer and temperature.
Recommend adjust first layer adjustment. As nozzle moves from one rectangle to next, adjust layer height by -.050 then observe results, Continue as each rectangle (square) is finished. You can stop print at any place and make further adjustments. Identify the best two, and narrow the calibration even further.
Recommend once have range narrowed, let it finish print to see the results of first layer on next level(s).
Repeat the process to ascertain optional temperature.