Enhanced First Layer Calibration
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.17 – €0.21 net (excluding VAT)
For file: 1stlayer02mmx3_02mm_petg_mk3s_12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 12.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Allows 5 (five) adjustments during one short (12 minute max) print
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 201
- Makes
- 0
- Views
- 846
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
Allows 5 (five) adjustments during one short (12 minute max) print
Print instructions
Recommend using 0.2 layer height (all layers).
Start print at recommended first layer and temperature.
Recommend adjust first layer adjustment. As nozzle moves from one rectangle to next, adjust layer height by -.050 then observe results, Continue as each rectangle (square) is finished. You can stop print at any place and make further adjustments. Identify the best two, and narrow the calibration even further.
Recommend once have range narrowed, let it finish print to see the results of first layer on next level(s).
Repeat the process to ascertain optional temperature.