1 / 1
E3D V6 Heatbrake Heatsink Cooling Fan Shroud/Mount/Holder — zdjęcie 1

E3D V6 Heatbrake Heatsink Cooling Fan Shroud/Mount/Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement heatsink fan shroud for E3D V6 (Round) heatsink.

Ocena
4,75 / 5
Polubienia
18
Pobrania
228
Wydruki
3
Wyświetlenia
646
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The blue plastic fan shroud that came with my printer snapped right in half.  
After supergluing it for a while, it just became too much hassle.  While waiting for a new fan, I remodeled and resin printed a replacement.

This is a little more beefy than the original shroud, so it's closer to the heater block.  I don't recommend printing this from PLA.  Use something that is high-temp and probably add some kapton tape too.

Tagi