1 / 1
KP3S Y-Belt Tensioner Knob + Nylock — zdjęcie 1

KP3S Y-Belt Tensioner Knob + Nylock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix to use a 3d printed knob with a nylock to make this tensioner even more convenient to use

Ocena
0 / 5
Polubienia
5
Pobrania
81
Wydruki
0
Wyświetlenia
586
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

After making my first remix I realized some people would want a knob of some sort so that this tensioner would be even easier to use.

This should do the trick, there are three variants of the belt tensioner itself depending on what exact M3 screw you have and if you want the screw to be countersunk or not it's mostly an aesthetic thing. Knob itself is designed to take a nylock though a regular one could work in a pinch. I may add a heat insert version down the line.

Print in PETG at the least, ABS/ASA or better if you can swing it. 

Doesn't need supports, 15-25% infill of your choice, 3-5 walls, and 4-5 top/bottom surfaces should be more than enough.  

 

Tagi