Base for "Compact Bowden Extruder" modded for flexible Filament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its a modded base-version of the popular "Compact Bowden Extruder, direct drive 1.75mm" by schlotzz.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Its a modded base-version of the popular "Compact Bowden Extruder, direct drive 1.75mm"
by schlotzz. I had Problems to use flexible Filaments (Polymaker Polyflex). The Filament squeezed itself between the Mk8-wheel and the bowden inlet out of line.
So i added a support inlet, which is very close to the mk8-wheel. Now i have no Problems at all.
PS: I use a MK8-Wheel with 9mm Diameter and constructed it for this size. Didnt tested it with a 8mm wheel. If you tested it, let me know if it works too,
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.18
Infill:
25%
Notes:
I printed mine in PLA
Category: 3D Printer Extruders