Base for "Compact Bowden Extruder" modded for flexible Filament
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its a modded base-version of the popular "Compact Bowden Extruder, direct drive 1.75mm" by schlotzz.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Its a modded base-version of the popular "Compact Bowden Extruder, direct drive 1.75mm"
by schlotzz. I had Problems to use flexible Filaments (Polymaker Polyflex). The Filament squeezed itself between the Mk8-wheel and the bowden inlet out of line.
So i added a support inlet, which is very close to the mk8-wheel. Now i have no Problems at all.
PS: I use a MK8-Wheel with 9mm Diameter and constructed it for this size. Didnt tested it with a 8mm wheel. If you tested it, let me know if it works too,
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.18
Infill:
25%
Notes:
I printed mine in PLA
Category: 3D Printer Extruders