RC Plane Ceiling Hook For Foam Slow Flyers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a ceiling hook to conveniently store your foamy (flat profile) RC planes.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 118
- Wydruki
- 2
- Wyświetlenia
- 585
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
The safest way to store a profile foamy is to hang it by the propeller. You can fit quite a few planes in a small space with this method.
Print two hooks and one plate. The hooks slot into the the base from behind. Uses a #8 flat head screw to secure it in place.
My print settings were:
- PETG
- 240 C nozzle / 70 C bed
- 0.40 mm nozzle, 0.15 mm layer height
- 30% infill, 2 perimeters
I think PLA or ABS would be just fine as well. PLA can get brittle over time if you live in a humid environment so you may want to increase the density or perimeters. I was generous with the tolerances so you should be able to use whatever nozzle size or layer heights you want.
Happy flying!