Mosquito Larvae Dipper Cup - Multipart v1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two part dipper cup used to sample mosquito larvae from a water source.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 652
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- GNU General Public License v3.0
This is version 1 a multipart dipper cup used to sample mosquito larvae from a water source. The adapter is held to the cup with 1 to 3 pieces of filament. It was designed for the pieces of filament to break and be quickly replaced. Instead the bottom of the adapter seems to be what breaks most of the time so this design can be improved . I included the step files if you would like to customize or improve the design. If you do improve the design please share it for all to enjoy.
Print Specs:
- Filament: Hatchbox White PETG
- Infill: 50% for cup, 25% for adapter
- Layer Height: 0.2mm
- Nozzle: 0.4mm
- Supports: Yes see attached photo. On the cup do not support the top of the 3 small holes.
Print with a brim. See the attached photos for print orientation and supported surfaces.
Edit: v1.1 strengthens the bottom of the adapters (that part that seems to break first).