Angled Nozzle Scrubber for Voron Trident
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a brass brush nozzle scrubber with a bucket for Voron Trident that goes on the front left side of the bed.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 161
- Wydruki
- 1
- Wyświetlenia
- 2567
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a brass brush nozzle scrubber with a bucket for Voron Trident. I looked on various sites for a scrubber designed for my Voron Trident, but I only found designs for the Voron 2.4
I then decided to design my own, which I based on a design posted by FunFunBoy on this site. (https://www.printables.com/model/201999-nozzle-scrubber-with-a-little-bucket-for-voron-24)
The brush, magnets, and hardware are the same, whit the exception that this design only uses one screw.
You will need to modify the code to reflect the location of the brush since in this design it is on the left side, not on the back.
UPDATE: I added two version with lower height buckets that better align with the bed level.