M+M M10X Pistol Brace/Stock Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A brace/stock adapter for M+M M10X and M10X-P
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 830
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
the V4 model is best done in a high strength filament, with the intention of threads being cut into the plastic using a tap, or milled out of aluminum and cutting threads (have done both, and both work well.)
the NUT model is designed to use nuts inserted behind the print to have metal threads. also works well.
Designed to be used with shouldered M3 screws, or countersunk. feel free to remix for standard M3 screws, but definitely use washers if you do that. designed to fit a 3 slot MLOK rail section for 1913 braces/stocks and the two hole stocks/braces of circle 10, stormwerkz, and USMG pattern. haven't tested those, but the MLOK section works perfectly, I used it to attach a TF1913 brace to my M10X.
printed from PLA but any material should work. holes should be properly sized to just run a tap through them (10-24 screws for the braces and rail sections)
plenty strong and was able to fully support the M10X when being held by the brace.
uses 4 quantity 5mm shouldered M3 screws to mount the block to the M10X and whatever hardware your brace/rail section includes to attach.
attached picture is of the adapter milled out of aluminum, milled on a 3018 CNC router.