45° & 67.5° Corner Door Stopper Adapter for Bummsi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents your door from slamming into the baseboard.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
These corner door-stopper adapters protect your baseboard. They are designed to fit the Bummsi door-stoppers from Burg-Wächter: https://www.amazon.de/gp/product/B001CTNLCM
The door-stoppers have a diameter of 50 mm and a height of 14 mm. The diameter, that actually attaches to the adapter, is smaller. They also come pre-applied with double-sided tape which makes them easy to attach. The adapter can be attached to the baseboard with double-sided tape; I used this one: https://www.amazon.de/tesa-Montageband-Tapeten-Putz-19mm/dp/B01FHBNV5C
The adapter should be printed without support in the given orientation; changing the orientation may result in loss of function. All areas that come in contact with adhesives should be thoroughly de-greased prior to applying any adhesives. Choose the right adapter by examining the angle with which the door hits the baseboard. I printed mine in PETG, PLA or any other filament will probably work fine as long as the orientation is retained. I recommend 2-5 perimeters and up to 25 % infill.