1 / 12
45° & 67.5° Corner Door Stopper Adapter for Bummsi — image 1
1 / 12

45° & 67.5° Corner Door Stopper Adapter for Bummsi

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Prevents your door from slamming into the baseboard.

Rating
0 / 5
Likes
4
Downloads
16
Makes
0
Views
230
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

These corner door-stopper adapters protect your baseboard. They are designed to fit the Bummsi door-stoppers from Burg-Wächter: https://www.amazon.de/gp/product/B001CTNLCM

The door-stoppers have a diameter of 50 mm and a height of 14 mm. The diameter, that actually attaches to the adapter, is smaller. They also come pre-applied with double-sided tape which makes them easy to attach. The adapter can be attached to the baseboard with double-sided tape; I used this one: https://www.amazon.de/tesa-Montageband-Tapeten-Putz-19mm/dp/B01FHBNV5C

The adapter should be printed without support in the given orientation; changing the orientation may result in loss of function. All areas that come in contact with adhesives should be thoroughly de-greased prior to applying any adhesives. Choose the right adapter by examining the angle with which the door hits the baseboard. I printed mine in PETG, PLA or any other filament will probably work fine as long as the orientation is retained. I recommend 2-5 perimeters and up to 25 % infill.

Tags