Project Cybercdock: IO-Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shield that mounts all the IO mounted into my Cyberdock project.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Shield that mounts all the IO mounted into my Cyberdock project. You'll probably want to develop your own catered to your own hub, but I hope this can serve as a reference or inspire you to get started.
I printed it in PLA and glued the hub bracket to the shield. In V1 I used screws, nuts and washers but it was generally a pain to install or modify.
If I ever do a V4 I'll likely modify the brackets to include threaded inserts. But that'll most likely be after I've found a better HUB.
Hub I used: https://www.amazon.de/-/en/gp/product/B09KZDJJD8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Feel free to suggest better hubs, this one runs a tad hot (up to 47C), and uses a bit more power than I'd like.