Project Cybercdock: IO-Shield
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shield that mounts all the IO mounted into my Cyberdock project.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 423
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Shield that mounts all the IO mounted into my Cyberdock project. You'll probably want to develop your own catered to your own hub, but I hope this can serve as a reference or inspire you to get started.
I printed it in PLA and glued the hub bracket to the shield. In V1 I used screws, nuts and washers but it was generally a pain to install or modify.
If I ever do a V4 I'll likely modify the brackets to include threaded inserts. But that'll most likely be after I've found a better HUB.
Hub I used: https://www.amazon.de/-/en/gp/product/B09KZDJJD8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Feel free to suggest better hubs, this one runs a tad hot (up to 47C), and uses a bit more power than I'd like.