Protection for boiler exhaust pipe 100 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
External sleeve/protection for boiler exhaust pipe 100 mm
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just like the previous project, the external protection of the chimney from the current condensing gas boiler was destroyed (became brittle). In this case, I found the piece separately, but I preferred to print it because it was very simple.
I printed it from orange PETG (that's what I had available) for the outside and white PLA for the inside. On the outside, ABS would probably be better, but I want to see how long it lasts. I printed with and without support, the difference is not big so I don't recommend using them even if the interior will not come out perfectly.
For a better fixation, I used two self-tapping screws directly in the wall of the house.