Protection for boiler exhaust pipe 100 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
External sleeve/protection for boiler exhaust pipe 100 mm
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 40
- Makes
- 0
- Views
- 373
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just like the previous project, the external protection of the chimney from the current condensing gas boiler was destroyed (became brittle). In this case, I found the piece separately, but I preferred to print it because it was very simple.
I printed it from orange PETG (that's what I had available) for the outside and white PLA for the inside. On the outside, ABS would probably be better, but I want to see how long it lasts. I printed with and without support, the difference is not big so I don't recommend using them even if the interior will not come out perfectly.
For a better fixation, I used two self-tapping screws directly in the wall of the house.