1 / 3
Ikea Önsklig bracket — zdjęcie 1
1 / 3

Ikea Önsklig bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

More stable bracket for Ikea Önsklig.

Ocena
5 / 5
Polubienia
16
Pobrania
205
Wydruki
1
Wyświetlenia
783
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

We had a diaper changing table from Ikea and are using the Önsklig bucket. After a while the bracket holding the bucket started to bend and has been worn out, the bucket sometimes has just been falling off when too heavy. 

I could obiously have it screwed to the table, but I thought: “I have a 3D printer, lets recreate it.” So I used Fusion360 to recreate the bracket. 

You should definitely print with support. I used PETG with 100% infill. It sits now really tight on and still can be screwed to the table. The steps on the bevel probably happend because I printed it laying down, you could try haveing it stand but don't forget the support.

Tagi