Mele Mini PC Dovetail Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp to attach a Mele MiniPC (eg Quieter 3) to a Vixen Style dovetail rail.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 259
- Wydruki
- 0
- Wyświetlenia
- 2163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Clamp to attach a Mele MiniPC (eg Quieter 3) to a Vixen Style dovetail rail.
I have designed this clamp to attach a Mele Mini PC, which is a popular choice amongst astronomers for telescope control, to a vixen style dovetail.
The hole spacing is 80mm and designed to take a M3x8mm cap head screw, so any similar form factor should also work.
The assembly is made of two parts, the base plate and the clamping mechanism. I have provided two files for the clamp section. The first is for vertical printing, the second is for printing flat, you need only print one of the two variants.
To assemble, press 3x M3 nuts into the 3 slots in the base plate. 3x M3*20 screws are then threaded through the clamp portion and tighten onto the nuts. A further 2 screws are then used to attach the base plate to the miniPC.