Soap mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mold to make you own custom soaps
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 1073
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A project I’m considering for this summer is making a 3D printed mold to create a custom concrete planter for outside. I have zero experience with craft molds and casting objects. I figured starting small would be the best practice. I also tend to have drier skin, so I decided to try making my own soap as my first practice.
I made the mold in Blender. After some trial, error, and four versions, I was happy with it. I printed it twice. Once with one perimeter using a .8mm nozzle, and once with two perimeters using a .4mm nozzle. Both were printed in PETG filament, so I could flex the mold to release the soap. This way, the mold would be reusable.
It was definitely a learning experience that will help in future mold-making. I think the result of my first try at making soap was decent. I will practice a bit more with soap to get my confidence up to tackle a bigger project. Do you have any tips for me?
Files included:
- SoapMoldv4.stl
- SoapMoldv4_0.4n_0.3mm_PETG_MK3S_1h17m_ApproxCost0.89.gcode
- SoapMoldv4_0.8n_0.3mm_PETG_MK3S_51m_ApproxCost0.91.gcode
- SoapMold.blend