iPhone 7+/8+ Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a new case that didn't interfere with certain electronics and rather than buy a bunch and test them, I…
- Ocena
- 4,5 / 5
- Polubienia
- 21
- Pobrania
- 389
- Wydruki
- 1
- Wyświetlenia
- 2332
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a new case that didn't interfere with certain electronics and rather than buy a bunch and test them, I decided to design my own. This fits the iPhone 7+/8+.
There are no overhangs greater than 45° so no supports are needed.
Print instructions
I used Priline Carbon Filled Polycarbonate at .2mm and the print came out perfect. I recommend printing in something that can flex a little without breaking like PETG, Polycarb, or TPU. I have not tried this print in TPU so print at your own risk.
You may need to scale the model in the slicer. I wouldn't exceed 1% deviation. In other words the working size should be between 99%-101%.