iPhone 7+/8+ Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a new case that didn't interfere with certain electronics and rather than buy a bunch and test them, I…
- Rating
- 4.5 / 5
- Likes
- 21
- Downloads
- 389
- Makes
- 1
- Views
- 2,332
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
I wanted a new case that didn't interfere with certain electronics and rather than buy a bunch and test them, I decided to design my own. This fits the iPhone 7+/8+.
There are no overhangs greater than 45° so no supports are needed.
Print instructions
I used Priline Carbon Filled Polycarbonate at .2mm and the print came out perfect. I recommend printing in something that can flex a little without breaking like PETG, Polycarb, or TPU. I have not tried this print in TPU so print at your own risk.
You may need to scale the model in the slicer. I wouldn't exceed 1% deviation. In other words the working size should be between 99%-101%.