1 / 1
Ersatzfuß für Faltpavillion / Replacement feet for folding pavillon — zdjęcie 1

Ersatzfuß für Faltpavillion / Replacement feet for folding pavillon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

After some feets of the pavillon were broken or missing, I decided to print new ones out of ASA

Ocena
5 / 5
Polubienia
6
Pobrania
84
Wydruki
1
Wyświetlenia
460
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

After some feets of the pavillon were broken or missing, I decided to print new ones out of ASA material.

Printed with Extrudr DuraPro ASA Anthrazit. It is possible to print without support but I turned it on its side to ensure maximum layer stability. In this case, some support on the heatbed is necessary.

It should fit for aluminium rods which have a inside dimension of 23mm x 23mm

 

Print Settings:

Prusa MK3S+ 
Prusa Slicer
0.20mm Quality Profile
0.4 Nozzle
Supports: only on heatbed
230°C Nozzle temp
110°C Bed temp

 

Have fun printing it!

 

Tagi