Ersatzfuß für Faltpavillion / Replacement feet for folding pavillon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After some feets of the pavillon were broken or missing, I decided to print new ones out of ASA
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 84
- Makes
- 1
- Views
- 462
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After some feets of the pavillon were broken or missing, I decided to print new ones out of ASA material.
Printed with Extrudr DuraPro ASA Anthrazit. It is possible to print without support but I turned it on its side to ensure maximum layer stability. In this case, some support on the heatbed is necessary.
It should fit for aluminium rods which have a inside dimension of 23mm x 23mm
Print Settings:
Prusa MK3S+
Prusa Slicer
0.20mm Quality Profile
0.4 Nozzle
Supports: only on heatbed
230°C Nozzle temp
110°C Bed temp
Have fun printing it!