Omnifixo - Field box (alternative v2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remixed version of the original OMNIFIXO field box that fits a few more items and an ajustable soldering iron stand
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 111
- Wydruki
- 2
- Wyświetlenia
- 4554
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a remixed version of the original OMNIFIXO field box that can be found here: https://www.thingiverse.com/thing:5436769
I have edited the internal layout to fit a few more items and also redesigned the soldering stand to allow for a removable, adjustable angle version that uses a bit of scrap aluminium tube (10mm ⌀ dia x 52mm length).
The soldering stand slots into place from above, then you set the angle and push/clip it further into the box to keep it in place. You will hear a clicking when you set to another angle.
This box holds the following:
- Omnifixo Third Hand (logo/ruler face up or face down)
- TS80 Soldering iron
- a bit of solder
- wire tip cleaner
- a spare soldering iron tip
Parts needed to build:
- ASA/ABS filament
- Qty x 4 off 6mm dia x 3mm magnets
- Aluminium tube 10mm dia x 1mm wall x 52mm length
This was printed on the Prusa and to prevent warping I added glue and extended the brim to 10mm. I also changed 'Print settings > Skirt and Brim > Skirt > Draft shield > Limited
Some images show this field box next to my Olfa AK-4 & spare blade box.
Category: Tool Holders & Boxes