Mercury one/1.1 Ender 5 Core XY - EVA 2.4 Biqu H2 V2 Mount with Tri-Horn Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting system to suit Mercury one core XY with eva 2.4
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 2336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Aim - The mount provides a stiff mounting to the eva carriage system using 4 mounting points on the biqu h2 while leaving the release arm and gear free.
Difficulty - Basic modding skills needed but if you have converted your ender 5 to Mercury one/1.1 this should be easy enough.
Print Level - Easy print, no supports, no crazy angles/overhangs
Hardware requirements - Most will have these items laying around
- M3 heat inserts
- M3x8 socket head
- M3x8 pan head
- M3x25 Can be anything use on the tri-horn spacer
Notes -
- You MUST use pan heads on the bottom arm otherwise the tri-horn will not fit
- Heat inserts are required on the upper arm (I didn't take a picture)
- Socket head are required to sit flush on the lower part of the cradle
- Socket head on the upper arm DO NOT sit flush
Material - ABS/ASA
If theres any questions, just comment i will reply but like most people i do work so please allow some time for me to reply.