Skateboard/Longboard wall hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Skateboard/Longboard hanger that doesn't require any support, it should be able to hold any size board.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 324
- Wydruki
- 1
- Wyświetlenia
- 1441
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a Skateboard/Longboard hanger that doesn't require any support, it should be able to hold any size board. it takes about 6 hours to print per piece, so 12 hours total print time. u will also need 4 screws to secure this thing to a wall regular screws that are longer than 1 ½' should work fine. it also doesn't matter if u screw in the screws by hand or with a power tool both should do just fine.
Recommended settings
30%-100% infill
layer height doesn't matter
4 or more walls abs or petg
The print settings I used
30% infill cubic
layer height .2
4 walls
petg