Pixel Star w/ Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This pixel bullet star has 12mm holes and will take a 150 pixels.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 659
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
This pixel bullet star has 12mm holes and will take a 150 pixels. It's made to print on a bed that has capacity of 200mm. Entire snowflake assembled will be about 19.5" in size. Assembly requires 20 M3 x 6mm screws and nuts. This can be glued in addition to the screws for extra strength.
Currently I have only designed 1 Mount which is for a 3/4" EMT conduit. I added 2 holes to this mount so that you can secure it with screws. The mount itself attaches to the start with M4 x 20mm screws and nuts.
You will need to print 5 of the points and 1 hub.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2000
Infill:
20%