Pixel Star w/ Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This pixel bullet star has 12mm holes and will take a 150 pixels.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 125
- Makes
- 0
- Views
- 659
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
This pixel bullet star has 12mm holes and will take a 150 pixels. It's made to print on a bed that has capacity of 200mm. Entire snowflake assembled will be about 19.5" in size. Assembly requires 20 M3 x 6mm screws and nuts. This can be glued in addition to the screws for extra strength.
Currently I have only designed 1 Mount which is for a 3/4" EMT conduit. I added 2 holes to this mount so that you can secure it with screws. The mount itself attaches to the start with M4 x 20mm screws and nuts.
You will need to print 5 of the points and 1 hub.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2000
Infill:
20%