Pocket Palette Redux
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small "portable" wet pallet with a print in place hinged lid.
- Ocena
- 4 / 5
- Polubienia
- 29
- Pobrania
- 123
- Wydruki
- 2
- Wyświetlenia
- 714
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of a wet palette from @WasabiDjango. Added the thumb recess for easy opening, a grid for water retention on the bottom, and a print in place piano styled hinge. Printed with 4 walls @25% infill. Hinge and locking tabs might be a bit tight depending on how dialed in your printer is, but should loosen up with use.
EDIT - Adjusted the model based on some feedback from another user that was having issues with the model closing fully. Loosened up the tolerances on the hinge a bit and added a relief “cut” to the top panel edge closest to the hinge. Also separated out the locking tabs so if you want to forgo using them you can, and put some small cutouts near the front edges to allow for magnets. Cutout size is 12x3x1.5 mm, currently using some small 6x3x1.5 rectangular neodymium magnets to hold the lid closed.
Current versions is v04a.