Prusa i3 filament guide with 22mm bearings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament guide for Prusa i3 printers. Note you need 2 standard 22mm bearings.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 43
- Wydruki
- 3
- Wyświetlenia
- 429
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Description:
Filament guide that allows you to guide filament thread from behind the printer down to the extruder with minimal friction.
For assembly you will need:
- M3x18 screw (2x) - longer screws can be used too
- M3 hexagon nut (2x)
- Bearing: 22mm diameter, 8mm bore and 7mm wide (2x) - standard bearing for in-line skates
Glue is not needed, the nut will hold inside when the guide is assembled.
Printing:
PETG, 0.3mm layer height, 15% gyroid infill, 4 perimeters. The part named UniversalStand should be printed 2x! No supports needed.
Remixes:
I've made this model in online CAD software Onshape. Here is a link.
Note:
This is not my own idea. I've seen similar design on some pictures but it used different bearings. I didn't find the original link, so it's not exactly a remix. If you have any objections, please let me know.