Prusa i3 filament guide with 22mm bearings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament guide for Prusa i3 printers. Note you need 2 standard 22mm bearings.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 43
- Makes
- 3
- Views
- 429
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Description:
Filament guide that allows you to guide filament thread from behind the printer down to the extruder with minimal friction.
For assembly you will need:
- M3x18 screw (2x) - longer screws can be used too
- M3 hexagon nut (2x)
- Bearing: 22mm diameter, 8mm bore and 7mm wide (2x) - standard bearing for in-line skates
Glue is not needed, the nut will hold inside when the guide is assembled.
Printing:
PETG, 0.3mm layer height, 15% gyroid infill, 4 perimeters. The part named UniversalStand should be printed 2x! No supports needed.
Remixes:
I've made this model in online CAD software Onshape. Here is a link.
Note:
This is not my own idea. I've seen similar design on some pictures but it used different bearings. I didn't find the original link, so it's not exactly a remix. If you have any objections, please let me know.