HDX (Home Depot) Shelf (shelving) Components & Mods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this to store surfboards vertically but could work for a lot of different things like plywood or books.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this to store surfboards vertically but could work for a lot of different things like plywood or books.
I experimented with a few different designs to cut down on print time & materials while still maintaining sturdiness. This was the best I was able to create.
The original design was the “HDX Organizer” file, after that, I chopped it up into the other configurations
I created clips for added stability, to prevent something from pulling or knocking the bracket out. They're not needed though the longer version tends to hold better under pressure.
Bracket should be printed on its side with supports. See picture for reference.
Printed on the Ender 3 v2 with stock Standard quality settings.
Update: I've added 2 lightweight versions of the end-stop, for increased print time & for items that might require less sturdiness.