Loctite small bottle holder for pegboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saw the loctite bottle holder and thought it was perfect - except it came with provision for magnets to attach it to a…
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 188
- Wydruki
- 1
- Wyświetlenia
- 1271
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Saw the loctite bottle holder and thought it was perfect - except it came with provision for magnets to attach it to a tool box. I have pegboard, so I cut out the holes for the magnets and mixed in the 2 position pegboard blank. Had a bit of a rough time in MeshMixer with the boolean add, strangely enough - it was completely mutilating the geometry - but I managed to get something that is non-manifold and prints well.
As an aside, just above the bottle holder in the photo is the pegboard hex bit holder which I've found to work really well.
Print instructions
Category: Tool Holders & Boxes Summary
Saw the loctite bottle holder and thought it was perfect - except it came with provision for magnets to attach it to a tool box. I have pegboard, so I cut out the holes for the magnets and mixed in the 2 position pegboard blank. Had a bit of a rough time in MeshMixer with the boolean add, strangely enough - it was completely mutilating the geometry - but I managed to get something that is non-manifold and prints well.
As an aside, just above the bottle holder in the photo is the pegboard hex bit holder which I've found to work really well.
Print Settings
Printer: Monoprice Maker Ultimate
Rafts: No
Supports: No
Resolution: 0.1mm
Infill: 20%
Notes:
supports are only needed for the pegboard pegs. raft or brim not needed because there's so much buildplate contact. Printed in red translucent PLA which looks pretty pro with the loctite bottles.