Raspberry Pi4 case for Prusa MK3S+ with DSI opening Shorted for LED Light Bar Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi4 case with a shortened and thinned mount arm to fit under LED Light Bar Mod
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 694
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A Raspberry Pi4 case with a shortened and thinned mount arm to fit under LED Light Bar Mod. I found the original case was too high and interfered with the Light Bar mount. I made the mounting arm thinner and shorter and put a chamfer on the corner of the case near the Light Bar.
I had also added mounts for a fan on the case but that didn't work out so I got the heat-sink that this case was originally designed for and instead of reprinting the piece I just cut out the modification which is why the edges around the fan look a little rough.
As stated in the comments, the 3mf file I provided is for a 0.6mm nozzle, so be sure to change it if you have a 0.4mm nozzle.
I included my gcode and 3mf files and also the step file for ease of remixing.