Raspberry Pi4 case for Prusa MK3S+ with DSI opening Shorted for LED Light Bar Mod
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.50 – €1.83 net (excluding VAT)
For file: raspberry_pi_4_case v5_Shorter_mount_Arm_0.6n_0.3mm_PETG_MK3S_1h28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.67 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 1.46 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Raspberry Pi4 case with a shortened and thinned mount arm to fit under LED Light Bar Mod
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 44
- Makes
- 1
- Views
- 695
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
A Raspberry Pi4 case with a shortened and thinned mount arm to fit under LED Light Bar Mod. I found the original case was too high and interfered with the Light Bar mount. I made the mounting arm thinner and shorter and put a chamfer on the corner of the case near the Light Bar.
I had also added mounts for a fan on the case but that didn't work out so I got the heat-sink that this case was originally designed for and instead of reprinting the piece I just cut out the modification which is why the edges around the fan look a little rough.
As stated in the comments, the 3mf file I provided is for a 0.6mm nozzle, so be sure to change it if you have a 0.4mm nozzle.
I included my gcode and 3mf files and also the step file for ease of remixing.