Anker Battery Pack Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery pack charging rack.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 737
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Charge pack rack for Anker battery packs.
4/28/26 - Updated to extend rack more and make holder walls taller. Much more secure for packs.
8/23/23 - Update to extend top of rack 20mm. This way the packs won't tip out as easily.
Magnetic USB cables for easy connection so you don't need to search for a cable.
Made this for my family which uses charge packs often but they don't seem to recharge themselves often… :)
These cables zip tie in to place.
GCODE file for printing in PLA with easy to remove supports and 6 perimeters for durability. Supports required for rack face but not for zip tie openings. If you go about slicing this yourself, put support blockers in place over the zip tie openings so you don't need to clean out those openings. The zip tie openings don't require supports.
.3mf has blockers for zip tie openings.
Mount with some command strips or double sided tape. Remove using dental floss. It can cut through the foam tape nicely.