Headset mount (top of stem) for Lezyne GPS computers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another remix to work on my skills with importing and editing STL files into Fusion 360 while preserving design…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 616
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another remix to work on my skills with importing and editing STL files into Fusion 360 while preserving design history. See my Blendr mount for more details on how I accomplished this.
This design is intended to be used under the stem topcap and above the stem to mount a Lezyne GPS computer.
Print instructions
Category: Sport & Outdoors Summary
Another remix to work on my skills with importing and editing STL files into Fusion 360 while preserving design history. See my Blendr mount for more details on how I accomplished this.
This design is intended to be used under the stem topcap and above the stem to mount a Lezyne GPS computer.
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0.15mm
Infill: 20%
Filament: 3D Solutech PLA black
Notes:
This design is oriented differently than my Blendr mount - I realized that the surface quality on the interface with the Lezyne X-lock was more important than the surface quality on the support piece underneath it, so I worked on this one upside-down, and suggest printing it that way. This way, support material is only needed for the single diagonal support mount.
Honestly, looking at prints done in either orientation, as long as your printer is decent at supports, you shouldn't have any trouble with either.