Fox fork air spring "bullet" tool for compressing internal O-rings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When performing air spring maintenance on a Fox fork, Fox specifies part number 398-00-657Tooling: Bullet, Sealhead To…
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 665
- Wydruki
- 3
- Wyświetlenia
- 3345
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When performing air spring maintenance on a Fox fork, Fox specifies part number 398-00-657Tooling: Bullet, Sealhead To Shaft, FLOAT NA 2 This tool can be really tough to find, even when you work for a bike retailer. So... 3D printing to the rescue.
Fits 10mm shafts on air spring shafts to install the negative spring plate with new O-rings.
After printing, sand the bullet surface to make installation a little easier. Also a quick coat of Slick Honey (or your preferred assembly grease) will help.
Update 14 Jan 2020: Thanks to r5v who contacted me here and Brett Dean who contacted me via Facebook, I've now modeled the 8mm bullet tool, Fox part number 398-00-320. I don't have a fork to test this with, so I found a decent photo of the Fox tool online and used Fusion360 to get the key dimensions.
Print instructions
Category: Sport & Outdoors Summary
When performing air spring maintenance on a Fox fork, Fox specifies part number 398-00-657Tooling: Bullet, Sealhead To Shaft, FLOAT NA 2 This tool can be really tough to find, even when you work for a bike retailer. So... 3D printing to the rescue.
Fits 10mm shafts on air spring shafts to install the negative spring plate with new O-rings.
After printing, sand the bullet surface to make installation a little easier. Also a quick coat of Slick Honey (or your preferred assembly grease) will help.
Update 14 Jan 2020: Thanks to r5v who contacted me here and Brett Dean who contacted me via Facebook, I've now modeled the 8mm bullet tool, Fox part number 398-00-320. I don't have a fork to test this with, so I found a decent photo of the Fox tool online and used Fusion360 to get the key dimensions.