Handle for mini files with 3mm shaft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple handle for miniature hobby files which have a 3mm shaft.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 185
- Wydruki
- 5
- Wyświetlenia
- 820
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple handle for miniature hobby files which have a 3mm shaft. Should press on pretty easily, although if your printer has issues with elephant foot you might need to open up the hole a little bit.
Modeled these from scratch because at the time I was using Thingiverse more and the search was (and still is) pretty much junk, just like the rest of the site. There's a reason I'm not there anymore.
Print instructions
I printed them standing up with a healthy brim -- I think I used at least 8-10mm of brim to make sure they didn't fall over during printing. Once that was done I cleaned off the brim, put the files in a vise, and hammered the handle into place.