1 / 4
AIDA Logo Sign
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A logo sign I made for my mother-in-law who really loves the AIDA Cruises
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 952
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (4)Powiązane
BOM
- Printed files
- Laser Cut acrylic pieces
- 4x Generic Dollar Store LED cords (https://www.action.com/nl-nl/p/jute-touw-met-ledverlichting/)
- Insulated copper wire
Instructions
This instuction is based on the LED cords I used, but should be transferable to other forms.
- Figure out the polarity of the strip with a multimeter. Since the bare wire is annealed so it doesn't conduct electricity, strip the wires on the insulated part to meassure the polarity
- Run 2 wires (positive and negative) from one of the battery packs through all bases
- Solder the positive leads of the lights to the positive wire and the negative leads to the negative wire.
- Hotglue everything in place.
- Super glue the insides to the letters.
License
CC-0 for the model, though I would recommend against any commercial endeavors, since AIDA holds intellectual property over the logo design.