1 / 4
AIDA Logo Sign
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A logo sign I made for my mother-in-law who really loves the AIDA Cruises
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 58
- Makes
- 0
- Views
- 952
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
BOM
- Printed files
- Laser Cut acrylic pieces
- 4x Generic Dollar Store LED cords (https://www.action.com/nl-nl/p/jute-touw-met-ledverlichting/)
- Insulated copper wire
Instructions
This instuction is based on the LED cords I used, but should be transferable to other forms.
- Figure out the polarity of the strip with a multimeter. Since the bare wire is annealed so it doesn't conduct electricity, strip the wires on the insulated part to meassure the polarity
- Run 2 wires (positive and negative) from one of the battery packs through all bases
- Solder the positive leads of the lights to the positive wire and the negative leads to the negative wire.
- Hotglue everything in place.
- Super glue the insides to the letters.
License
CC-0 for the model, though I would recommend against any commercial endeavors, since AIDA holds intellectual property over the logo design.