Nintendo Switch Joycon Controller (no logos)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Nintendo Switch Joycon Controller by MiddletonMade with the logos removed at the request of a friend.
- Ocena
- 4,625 / 5
- Polubienia
- 199
- Pobrania
- 1181
- Wydruki
- 18
- Wyświetlenia
- 5369
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
Remix of Nintendo Switch Joycon Controller by MiddletonMade. Holds the joycons while playing multiplayer games. Two designs, the narrower v1 and the wider v2.
Background
A coworker was confused by the printing instructions on the original (they looked contradictory), so I took a look to figure out what was meant.
He also mentioned that he wished that it didn't have the logos, (like a commenter on the original) so I used MeshMixer to remove the logo and rotate the models so they load on the build plate properly. Other than that, these are unchanged from the original, which is a really cool design. Full credit to MiddletonMade.
Print instructions
Should load up in your slicer in the proper orientation with the back facing down. Suggest printing with supports touching the build plate - will need to bridge for this to work. Otherwise printing with supports everywhere should be fine.