G·Weike Cloud Controller Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DXF Cut Template for replacing the stock Metal Controller Cover - Can be imported into Software like LightBurn.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The stock Metal Cover blocks all visual access to the Controllers Status LEDs as such replacing it with a transparent one will solve that visibility problem.
The New Cover was also redesigned to be a bit larger in all directions providing a little more protection to Controller below it.
You'll most likely also be needing a new set of longer M3 Screws due to the added Material Thickness over the Metal Cover ( I've used M3x6mm Button Head Screws in combination with the 3mm Acrylic used )