1 / 3
G·Weike Cloud Controller Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DXF Cut Template for replacing the stock Metal Controller Cover - Can be imported into Software like LightBurn.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The stock Metal Cover blocks all visual access to the Controllers Status LEDs as such replacing it with a transparent one will solve that visibility problem.
The New Cover was also redesigned to be a bit larger in all directions providing a little more protection to Controller below it.
You'll most likely also be needing a new set of longer M3 Screws due to the added Material Thickness over the Metal Cover ( I've used M3x6mm Button Head Screws in combination with the 3mm Acrylic used )