1 / 3
Shelf for anything
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I based this design from other designs i saw on PrusaPrinters.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
I based this design from other designs i saw on PrusaPrinters. I like the design but I needed something bigger for my project. So, I designed my own. Fusion 360 even said this was Over-engineered, so this should hold nearly anything (within reason). I used 10% infill .3mm layer height in Prusament PETG.
THERE IS A LATTER B ON EACH BRACKET, TO INDICATE BOTTOM OF BRACKET!!
These are designed to hold IKEA BURHULT SHELVES (or of equal thickness)
(the orange was V1, yes i know the mistake i made, the black is V2, which is perfected.