1 / 3
Shelf for anything
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I based this design from other designs i saw on PrusaPrinters.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
I based this design from other designs i saw on PrusaPrinters. I like the design but I needed something bigger for my project. So, I designed my own. Fusion 360 even said this was Over-engineered, so this should hold nearly anything (within reason). I used 10% infill .3mm layer height in Prusament PETG.
THERE IS A LATTER B ON EACH BRACKET, TO INDICATE BOTTOM OF BRACKET!!
These are designed to hold IKEA BURHULT SHELVES (or of equal thickness)
(the orange was V1, yes i know the mistake i made, the black is V2, which is perfected.